Ski & wake boats detailing in Castle Hills.
Wake-tower-tall detailing for inboard ski and wakesurf boats — gelcoat polish, vinyl care, tower clean, and a finish that sets up every shot.
Castle Hills owners with ski & wake boats typically work out of Canyon Lake (40 minutes north). Slip-kept boats at Cypress Bend Marina, Mountain Springs Resort, Cranes Mill Marina. Trailer launches at Cranes Mill Park ramp and Comal Park ramp. Hard mineral water from Comal Springs feed leaves spots if rinses aren't quick.
Service specs · Castle Hills
Built for Castle Hills owners.
Castle Hills sits inside Loop 410 with tree-lined streets and historic homes. Lots are smaller than the outer suburbs but owners invest heavily in their vehicles. We service driveways throughout Castle Hills and coordinate aircraft details at SAT and Stinson hangars five to fifteen minutes away.
Owner profile. Castle Hills is a tiny wealthy enclave inside San Antonio's loop. Lots are modest in size but owners trend high-end: sport boats trailered to Canyon Lake, owner-flown Cirrus and Citation aircraft at SAT, and luxury smaller-format RVs.
A wakesurf boat is a $150,000 floating sun lounger with a 450-horsepower inboard underneath. It pulls weekend warriors, surf trainees, and bachelor parties — and it spends every weekday baking in a slip or under a shrink wrap that traps moisture. Tow towers collect rust at the welds. Vinyl seating soaks up oil-based sunscreen until it's permanently yellow. Ballast bag drains leak under the floor and stain the deck. Stereo speakers get water-spotted from boarder splashes. We detail the whole package — not just the hull — because the parts of a wakeboat that get photographed at sunset are the tower, the vinyl, and the freshly polished cup-holder ring.
Where Castle Hills owners keep their ski & wake boats.
Canyon Lake
40 minutes north from Castle Hills. Marinas: Cypress Bend Marina, Mountain Springs Resort, Cranes Mill Marina. Ramps: Cranes Mill Park ramp, Comal Park ramp, Boat Ramp #1 (Canyon City).
Hard mineral water from Comal Springs feed leaves spots if rinses aren't quick.
Stinson Municipal (SSF)
in town from Castle Hills. GA ramp loaded with owner-flown singles, twins, and turboprops. Multiple FBOs and tenant hangars.
Storage facilities
various I-10 corridor storage facilities, Loop 1604 storage yards, South Side storage parks. We service trailers and RVs on-site at storage yards.
Also serving these lakes
Medina Lake (40 minutes west), Lake LBJ (1 hour north), Lake Travis (1.5 hours northeast).
Additional airports
San Antonio International (SAT, in town) · Boerne Stage Field (5C1, in Boerne) · New Braunfels Regional (BAZ, 30 minutes east)
Ski & wake boats protocol — Castle Hills edition.
Pre-rinse with fresh water from waterline to tower top to flush lake debris, pollen, and spider webs before any product touches the gelcoat.
Hand-wash hull with non-stripping marine soap and a soft microfiber wash mitt — never automatic brushes on metalflake or pearlescent gelcoat.
Polish gelcoat with a dual-action polisher and a polish suited to the boat's finish — metalflake, solid color, and pearlescent each get different pads and chemistry.
Tow tower clean — hand wash welded seams, treat any surface oxidation at the powder-coat with metal-specific polish, condition rubber tower-clamp pads.
Ballast compartment + lockers: open every hatch, check for standing water and bag-leak stains, treat with marine enzyme deodorizer.
Vinyl seating gets a marine-specific cleaner (non-bleach) followed by UV-protective conditioner that won't gum up at 95°F.
Sunscreen-yellowed white vinyl gets a dedicated vinyl brightener — multi-pass treatment for boats that have been neglected.
Tower stereo speakers wiped down with care — water-resistant doesn't mean spray-tolerant. Surf gates, ballast pumps, and helm electronics wiped, never sprayed.
Marine sealant or ceramic coating applied to the hull, vinyl protectant locked on the seating, and a final pass on the dashboard plastics and helm gauges.
What's included.
What owners always ask.
Yes — Canyon Lake (40 minutes north from Castle Hills) is one of our core service areas for ski & wake boats. We work slip-kept boats at Cypress Bend Marina and Mountain Springs Resort and ramp-side jobs at Cranes Mill Park ramp. We bring our own water and power.
Yes — Canyon Lake slips (Cypress Bend, Mountain Springs, Cranes Mill), Lake Travis marinas (Volente Beach, Lakeway, Hurst Harbor, Briarcliff), Lake LBJ slips, and most home docks across the Hill Country. We bring our own water and power so we don't need slip hookups.
Most of them, yes. Oil-based sunscreens bond into the vinyl topcoat under UV. We use a vinyl-specific brightener that lifts the staining in multiple passes. Deep set-in stains may need two visits, but a single pass usually pulls 80-90% out.
Not when it's done right. We hand-polish powder-coated and carbon towers with appropriate metal-safe compounds — never rotary buffers. We test a hidden area first so you see the result before we commit to the whole tower.
We pull the floor hatches, inspect the bilge under the bags, deodorize with marine enzyme cleaner that eats the bacteria, then dry the area before reassembly. If we find a chronic leak, we tell you so you can have a tech replace the bag.
Yes — we offer Friday rapid-detail packages for $150-200: full exterior wash, vinyl wipe, tower clean, glass and helm. Locks in the look without the full polish service.
A standard wash, polish, vinyl, tower, and ballast service on a 22-24 ft V-drive starts at $350. Add ceramic coating ($200-300), bring an older boat with heavy oxidation ($500-700), or schedule pre-trip rapid service for a flat fee.
Park it. We'll handle it.
Same care, every job. We come to your Castle Hills driveway, dock, hangar, or storage site.