Jet skis detailing in New Braunfels.
Personal watercraft detailing for Sea-Doo, Yamaha WaveRunner, and Kawasaki — single skis or full family fleets.
New Braunfels owners with jet skis typically work out of Canyon Lake (at the lake). Slip-kept boats at Cypress Bend Marina, Mountain Springs Resort, Cranes Mill Marina. Trailer launches at Cranes Mill Park ramp and Comal Park ramp. Hard mineral water from Comal Springs feed leaves spots if rinses aren't quick.
Service specs · New Braunfels
Built for New Braunfels owners.
New Braunfels owners get the best of three worlds: Canyon Lake five minutes north, Comal River and Guadalupe in town, and New Braunfels Regional Airport (BAZ) with its own hangar fleet. We service driveways, lakeside docks, and the BAZ ramp from one home base.
Owner profile. New Braunfels mixes Hill Country family homes with lake-adjacent properties. Owners run the full boat fleet at Canyon Lake (5 minutes north), Schlitterbahn-area visitors with rented and owned RVs, and a steady fleet of small aircraft at New Braunfels Regional airport.
Jet skis live a punishing life in Texas summers. They're trailered, launched, ridden hard, pulled back out, and parked in a hot garage or under a canvas cover where they bake until the next weekend. Bumper gelcoat scuffs from dock contact. Footwell carpets shred and stink of lake water. Saddle vinyl rips at the seams from kids jumping on. Engine compartments collect a thin film of fuel, oil, and salt or hard-water residue depending on where you ride. Most owners have two or three skis they want done at once — and most local detailers don't take PWCs because they're awkward to work on. We do them all day.
Where New Braunfels owners keep their jet skis.
Canyon Lake
at the lake from New Braunfels. Marinas: Cypress Bend Marina, Mountain Springs Resort, Cranes Mill Marina. Ramps: Cranes Mill Park ramp, Comal Park ramp, Boat Ramp #1 (Canyon City).
Hard mineral water from Comal Springs feed leaves spots if rinses aren't quick.
New Braunfels Regional (BAZ)
in town from New Braunfels. Local FBO with hangar fleet of piston singles and twins; owner-pilot community.
RV resorts we visit
Hill Country Retreat (Canyon Lake), Yogi Bear's Jellystone Canyon Lake, Cranes Mill RV Park, Hidden Valley RV Resort, Mountain Springs Resort, Sandy Beach RV Park.
Storage facilities
Canyon Lake RV Storage, FM 2673 storage yards, Sattler-area storage. We service trailers and RVs on-site at storage yards.
Also serving these lakes
Medina Lake (40 minutes west).
Additional airports
New Braunfels Regional (BAZ, 30 minutes east) · Stinson Municipal (SSF, in town)
Jet skis protocol — New Braunfels edition.
Pre-rinse top + bottom + intake grate to flush lake debris, sand, weeds, and loose dirt.
Hand-wash with PWC-safe soap and a microfiber mitt — no automatic brushes that scratch gelcoat.
Gelcoat polish with a small-pad DA polisher — get into the contours that big pads miss.
Bumper scuff inspection and spot polish; severe gouges flagged for gelcoat filler service (referral).
Footwell deep brush with non-skid-safe cleaner; rinse thoroughly to clear sand and grit.
Saddle vinyl: marine cleaner, sunscreen-stain pass, UV conditioner. Stitching inspected for tearing.
Engine compartment wipe-down — never sprayed. Microfiber cloths and PWC-safe degreaser only.
Jet pump intake grate cleaned (sand and weeds), pump nozzle wiped, reverse bucket lubricated lightly.
Stainless handlebar trim, footrest plates, and tie-down loops polished.
Decal inspection and restoration with vinyl polish if faded. Trailer wash + tire dressing for trailered skis.
What's included.
What owners always ask.
Yes — Canyon Lake (at the lake from New Braunfels) is one of our core service areas for jet skis. We work slip-kept boats at Cypress Bend Marina and Mountain Springs Resort and ramp-side jobs at Cranes Mill Park ramp. We bring our own water and power.
Yes — most of our PWC customers have two or three skis. Multi-ski bookings get a per-ski discount. We typically do a family fleet of three in 6-8 hours.
Light scuffs we polish out. Medium scuffs we polish and conceal as much as possible. Deep gouges that show fiberglass underneath need a gelcoat filler — we refer those to a local gelcoat repair shop and finish the detail around the repair.
Never. Engine bays on PWCs are tight and full of electronics — ECUs, stators, ignition coils — that don't appreciate water. We wipe down with microfiber and PWC-safe degreaser only. Safe and effective.
Yes — typically 6-12 months on gelcoat with regular freshwater rinses between rides. Ceramic dramatically reduces hard-water spots and makes weekly rinse-and-wipe maintenance trivial.
Yes. Sand grinds into non-skid footwell texture and requires a stiff-bristle brush, flood-rinse, and then a UV-safe protectant. We do this on every PWC detail.
A standard wash, polish, vinyl, and engine wipe starts at $200 per ski. Heavy oxidation, ceramic coating, or scuff polishing pushes to $300-450. Multi-ski packages save $30-50 per ski.
Park it. We'll handle it.
Same care, every job. We come to your New Braunfels driveway, dock, hangar, or storage site.