Experimentals detailing in Boerne.
Aviation-grade detailing for Van's RV-series, Lancair, Glasair, Sonex, Carbon Cub, and other owner-built experimental aircraft.
Boerne-based experimentals owners typically operate out of Boerne Stage Field (5C1, in Boerne). T-hangar community, owner-pilot heavy, Cirrus and Bonanza density. We also work Stinson Municipal (SSF) and San Antonio International (SAT) for owners with hangar arrangements across multiple fields.
Service specs · Boerne
Built for Boerne owners.
Boerne is one of our densest mobile-detail service zones. The combination of luxury Hill Country homes, RV-resort proximity, and a thriving private-pilot community at Boerne Stage Field means we work the same areas weekly. Most Boerne jobs are home-driveway service, but we also work resort sites and hangar floors.
Owner profile. Cordillera Ranch and Fair Oaks Ranch luxury homes, weekend wakesurfers towing to Canyon Lake, Class A diesel pushers at Hill Country Retreat, and Cirrus and Bonanza owners home-hangared at Boerne Stage Field.
Experimentals and kit aircraft are a unique category — every airplane is a one-off. A Van's RV-7 might have polyurethane paint applied by a pro shop, or rattle-can paint applied by the builder in his garage. A Lancair IV-P could have wet-sanded composite finish or fiberglass with primer. We always ask the owner: 'What paint did you use, and what's your preferred chemistry?' Their answer determines our entire approach. South Texas has a strong EAA presence (chapters in San Antonio, Boerne, New Braunfels), and we've worked on dozens of homebuilts at hangars across the Hill Country. Owners are typically the builder — they know every rivet, every weld, every paint touch-up — and they appreciate when we treat the airplane the same way they would.
Where Boerne owners keep their experimentals.
Canyon Lake
20 minutes east of Boerne from Boerne. Marinas: Cypress Bend Marina, Mountain Springs Resort, Cranes Mill Marina. Ramps: Cranes Mill Park ramp, Comal Park ramp, Boat Ramp #1 (Canyon City).
Hard mineral water from Comal Springs feed leaves spots if rinses aren't quick.
Boerne Stage Field (5C1)
in Boerne from Boerne. T-hangar community, owner-pilot heavy, Cirrus and Bonanza density.
RV resorts we visit
Hill Country Retreat, Buckhorn Lake Resort, Mission Bell RV Resort, BeaverCreek RV Resort, Cordillera RV Resort.
Storage facilities
Boerne Stage Storage, Hill Country RV Storage, I-10 Self Storage (Boerne). We service trailers and RVs on-site at storage yards.
Also serving these lakes
Medina Lake (40 minutes west), Lake LBJ (1 hour north).
Additional airports
Stinson Municipal (SSF, in town) · San Antonio International (SAT, in town)
Experimentals protocol — Boerne edition.
Pre-detail discussion with the owner-builder: what paint system, who applied it, what chemistry has been used in the past, any owner-flagged sensitive areas.
Mask sensors, antennas, pitot/static, and any specific markings the owner wants protected.
If polished aluminum (mirror-polished RV-series, Lancair): three-step hand polish with cleaner, polish, sealant — like an Airstream.
If polyurethane paint: standard aviation-approved soap + hand polish.
If epoxy primer or unpainted areas: extra-gentle cleaning, avoid solvents.
If composite (Lancair, Glasair, Sportsman): fiberglass-safe polish, never aggressive compounds.
Leading edges and prop spinner: bug strike removal with paint-appropriate cleaner.
Belly degrease (light — homebuilts typically don't have heavy exhaust stains).
Cockpit: vacuum, leather/vinyl/composite seat care, screen-safe avionics (Garmin G3X / G3X Touch is very common in homebuilts, also Dynon SkyView, Advanced Flight Systems, Levil).
Acrylic windshield and side glass: Plexus only.
Final walk with owner — every choice we made explained, photo log handed off.
What's included.
What owners always ask.
Yes — Boerne Stage Field (5C1, in Boerne) is part of our regular service rotation. We coordinate hangar or ramp access with the FBO or owner ahead of every appointment. T-hangar community, owner-pilot heavy, Cirrus and Bonanza density.
No — we ask you what paint system you used and choose chemistry appropriate to that system before we apply anything. If you used epoxy primer with no topcoat, we treat it extra-gently. If you used polyurethane, standard aviation soap is fine. We're cautious by default.
Yes — polished aluminum RVs (especially older RV-3s, RV-4s, and some RV-7s) get the three-step hand polish like an Airstream trailer. Cleaner, polish, sealant. Takes longer than a paint job but the mirror is worth it.
No — Lancair, Glasair, Velocity, and other composites get fiberglass-safe polish only. No aggressive compounds, no solvents that attack epoxy. We polish by hand with appropriate pads.
Yes — we service home hangars across the Hill Country, private hangars at Boerne Stage and Stinson, and private strips. We bring our own water and power. Coordinate access ahead of time.
Only with screen-safe microfiber and approved cleaner. We follow Garmin G3X Touch guidance, Dynon's care notes, Advanced Flight Systems (AFS), and Levil panel guidance. If you have OEM-specific preferences, share them.
Yes — spring brings a surge of EAA airshow prep work. Pre-airshow rapid detail, full polish, photo log handoff. We've prepped multiple homebuilts that flew to AirVenture and came back with awards.
A Van's RV-series with polyurethane paint starts at $500. A polished-aluminum RV with three-step polish work runs $700-900. A Lancair IV-P or large composite with full polish runs $900-1,200. Carbon Cub and similar backcountry homebuilts $600-800. Quote after walk-around.
Park it. We'll handle it.
Same care, every job. We come to your Boerne driveway, dock, hangar, or storage site.