Jet skis detailing in Boerne.
Personal watercraft detailing for Sea-Doo, Yamaha WaveRunner, and Kawasaki — single skis or full family fleets.
Boerne owners with jet skis typically work out of Canyon Lake (20 minutes east of Boerne). Slip-kept boats at Cypress Bend Marina, Mountain Springs Resort, Cranes Mill Marina. Trailer launches at Cranes Mill Park ramp and Comal Park ramp. Hard mineral water from Comal Springs feed leaves spots if rinses aren't quick.
Service specs · Boerne
Built for Boerne owners.
Boerne is one of our densest mobile-detail service zones. The combination of luxury Hill Country homes, RV-resort proximity, and a thriving private-pilot community at Boerne Stage Field means we work the same areas weekly. Most Boerne jobs are home-driveway service, but we also work resort sites and hangar floors.
Owner profile. Cordillera Ranch and Fair Oaks Ranch luxury homes, weekend wakesurfers towing to Canyon Lake, Class A diesel pushers at Hill Country Retreat, and Cirrus and Bonanza owners home-hangared at Boerne Stage Field.
Jet skis live a punishing life in Texas summers. They're trailered, launched, ridden hard, pulled back out, and parked in a hot garage or under a canvas cover where they bake until the next weekend. Bumper gelcoat scuffs from dock contact. Footwell carpets shred and stink of lake water. Saddle vinyl rips at the seams from kids jumping on. Engine compartments collect a thin film of fuel, oil, and salt or hard-water residue depending on where you ride. Most owners have two or three skis they want done at once — and most local detailers don't take PWCs because they're awkward to work on. We do them all day.
Where Boerne owners keep their jet skis.
Canyon Lake
20 minutes east of Boerne from Boerne. Marinas: Cypress Bend Marina, Mountain Springs Resort, Cranes Mill Marina. Ramps: Cranes Mill Park ramp, Comal Park ramp, Boat Ramp #1 (Canyon City).
Hard mineral water from Comal Springs feed leaves spots if rinses aren't quick.
Boerne Stage Field (5C1)
in Boerne from Boerne. T-hangar community, owner-pilot heavy, Cirrus and Bonanza density.
RV resorts we visit
Hill Country Retreat, Buckhorn Lake Resort, Mission Bell RV Resort, BeaverCreek RV Resort, Cordillera RV Resort.
Storage facilities
Boerne Stage Storage, Hill Country RV Storage, I-10 Self Storage (Boerne). We service trailers and RVs on-site at storage yards.
Also serving these lakes
Medina Lake (40 minutes west), Lake LBJ (1 hour north).
Additional airports
Stinson Municipal (SSF, in town) · San Antonio International (SAT, in town)
Jet skis protocol — Boerne edition.
Pre-rinse top + bottom + intake grate to flush lake debris, sand, weeds, and loose dirt.
Hand-wash with PWC-safe soap and a microfiber mitt — no automatic brushes that scratch gelcoat.
Gelcoat polish with a small-pad DA polisher — get into the contours that big pads miss.
Bumper scuff inspection and spot polish; severe gouges flagged for gelcoat filler service (referral).
Footwell deep brush with non-skid-safe cleaner; rinse thoroughly to clear sand and grit.
Saddle vinyl: marine cleaner, sunscreen-stain pass, UV conditioner. Stitching inspected for tearing.
Engine compartment wipe-down — never sprayed. Microfiber cloths and PWC-safe degreaser only.
Jet pump intake grate cleaned (sand and weeds), pump nozzle wiped, reverse bucket lubricated lightly.
Stainless handlebar trim, footrest plates, and tie-down loops polished.
Decal inspection and restoration with vinyl polish if faded. Trailer wash + tire dressing for trailered skis.
What's included.
What owners always ask.
Yes — Canyon Lake (20 minutes east of Boerne from Boerne) is one of our core service areas for jet skis. We work slip-kept boats at Cypress Bend Marina and Mountain Springs Resort and ramp-side jobs at Cranes Mill Park ramp. We bring our own water and power.
Yes — most of our PWC customers have two or three skis. Multi-ski bookings get a per-ski discount. We typically do a family fleet of three in 6-8 hours.
Light scuffs we polish out. Medium scuffs we polish and conceal as much as possible. Deep gouges that show fiberglass underneath need a gelcoat filler — we refer those to a local gelcoat repair shop and finish the detail around the repair.
Never. Engine bays on PWCs are tight and full of electronics — ECUs, stators, ignition coils — that don't appreciate water. We wipe down with microfiber and PWC-safe degreaser only. Safe and effective.
Yes — typically 6-12 months on gelcoat with regular freshwater rinses between rides. Ceramic dramatically reduces hard-water spots and makes weekly rinse-and-wipe maintenance trivial.
Yes. Sand grinds into non-skid footwell texture and requires a stiff-bristle brush, flood-rinse, and then a UV-safe protectant. We do this on every PWC detail.
A standard wash, polish, vinyl, and engine wipe starts at $200 per ski. Heavy oxidation, ceramic coating, or scuff polishing pushes to $300-450. Multi-ski packages save $30-50 per ski.
Park it. We'll handle it.
Same care, every job. We come to your Boerne driveway, dock, hangar, or storage site.