Ski & wake boats detailing in Canyon Lake.
Wake-tower-tall detailing for inboard ski and wakesurf boats — gelcoat polish, vinyl care, tower clean, and a finish that sets up every shot.
Canyon Lake owners with ski & wake boats typically work out of Canyon Lake (at the lake). Slip-kept boats at Cypress Bend Marina, Mountain Springs Resort, Cranes Mill Marina. Trailer launches at Cranes Mill Park ramp and Comal Park ramp. Hard mineral water from Comal Springs feed leaves spots if rinses aren't quick.
Service specs · Canyon Lake
Built for Canyon Lake owners.
Canyon Lake is where we spend most of our boat-detail days. Slip rentals at Cypress Bend, Mountain Springs, and Cranes Mill, plus the dense network of lakeside RV resorts (Yogi Bear's, Hidden Valley, Sandy Beach, Hill Country Retreat) means we're at the lake almost daily April through October.
Owner profile. Lakeside cabins and homes, weekend warriors with bass and pontoon boats at the slip, snowbird Class A and 5th-wheel owners at the resort, and a small but committed sailboat community.
A wakesurf boat is a $150,000 floating sun lounger with a 450-horsepower inboard underneath. It pulls weekend warriors, surf trainees, and bachelor parties — and it spends every weekday baking in a slip or under a shrink wrap that traps moisture. Tow towers collect rust at the welds. Vinyl seating soaks up oil-based sunscreen until it's permanently yellow. Ballast bag drains leak under the floor and stain the deck. Stereo speakers get water-spotted from boarder splashes. We detail the whole package — not just the hull — because the parts of a wakeboat that get photographed at sunset are the tower, the vinyl, and the freshly polished cup-holder ring.
Where Canyon Lake owners keep their ski & wake boats.
Canyon Lake
at the lake from Canyon Lake. Marinas: Cypress Bend Marina, Mountain Springs Resort, Cranes Mill Marina. Ramps: Cranes Mill Park ramp, Comal Park ramp, Boat Ramp #1 (Canyon City).
Hard mineral water from Comal Springs feed leaves spots if rinses aren't quick.
RV resorts we visit
Hill Country Retreat (Canyon Lake), Yogi Bear's Jellystone Canyon Lake, Cranes Mill RV Park, Hidden Valley RV Resort, Mountain Springs Resort, Sandy Beach RV Park.
Storage facilities
Canyon Lake RV Storage, FM 2673 storage yards, Sattler-area storage. We service trailers and RVs on-site at storage yards.
Also serving these lakes
Medina Lake (40 minutes west).
Additional airports
New Braunfels Regional (BAZ, 30 minutes east) · Stinson Municipal (SSF, in town)
Ski & wake boats protocol — Canyon Lake edition.
Pre-rinse with fresh water from waterline to tower top to flush lake debris, pollen, and spider webs before any product touches the gelcoat.
Hand-wash hull with non-stripping marine soap and a soft microfiber wash mitt — never automatic brushes on metalflake or pearlescent gelcoat.
Polish gelcoat with a dual-action polisher and a polish suited to the boat's finish — metalflake, solid color, and pearlescent each get different pads and chemistry.
Tow tower clean — hand wash welded seams, treat any surface oxidation at the powder-coat with metal-specific polish, condition rubber tower-clamp pads.
Ballast compartment + lockers: open every hatch, check for standing water and bag-leak stains, treat with marine enzyme deodorizer.
Vinyl seating gets a marine-specific cleaner (non-bleach) followed by UV-protective conditioner that won't gum up at 95°F.
Sunscreen-yellowed white vinyl gets a dedicated vinyl brightener — multi-pass treatment for boats that have been neglected.
Tower stereo speakers wiped down with care — water-resistant doesn't mean spray-tolerant. Surf gates, ballast pumps, and helm electronics wiped, never sprayed.
Marine sealant or ceramic coating applied to the hull, vinyl protectant locked on the seating, and a final pass on the dashboard plastics and helm gauges.
What's included.
What owners always ask.
Yes — Canyon Lake (at the lake from Canyon Lake) is one of our core service areas for ski & wake boats. We work slip-kept boats at Cypress Bend Marina and Mountain Springs Resort and ramp-side jobs at Cranes Mill Park ramp. We bring our own water and power.
Yes — Canyon Lake slips (Cypress Bend, Mountain Springs, Cranes Mill), Lake Travis marinas (Volente Beach, Lakeway, Hurst Harbor, Briarcliff), Lake LBJ slips, and most home docks across the Hill Country. We bring our own water and power so we don't need slip hookups.
Most of them, yes. Oil-based sunscreens bond into the vinyl topcoat under UV. We use a vinyl-specific brightener that lifts the staining in multiple passes. Deep set-in stains may need two visits, but a single pass usually pulls 80-90% out.
Not when it's done right. We hand-polish powder-coated and carbon towers with appropriate metal-safe compounds — never rotary buffers. We test a hidden area first so you see the result before we commit to the whole tower.
We pull the floor hatches, inspect the bilge under the bags, deodorize with marine enzyme cleaner that eats the bacteria, then dry the area before reassembly. If we find a chronic leak, we tell you so you can have a tech replace the bag.
Yes — we offer Friday rapid-detail packages for $150-200: full exterior wash, vinyl wipe, tower clean, glass and helm. Locks in the look without the full polish service.
A standard wash, polish, vinyl, tower, and ballast service on a 22-24 ft V-drive starts at $350. Add ceramic coating ($200-300), bring an older boat with heavy oxidation ($500-700), or schedule pre-trip rapid service for a flat fee.
Park it. We'll handle it.
Same care, every job. We come to your Canyon Lake driveway, dock, hangar, or storage site.