Center consoles detailing in Castle Hills.
Saltwater-tested, freshwater-friendly detailing for bay boats, center consoles, and offshore fishing rigs.
Castle Hills owners with center consoles typically work out of Canyon Lake (40 minutes north). Slip-kept boats at Cypress Bend Marina, Mountain Springs Resort, Cranes Mill Marina. Trailer launches at Cranes Mill Park ramp and Comal Park ramp. Hard mineral water from Comal Springs feed leaves spots if rinses aren't quick.
Service specs · Castle Hills
Built for Castle Hills owners.
Castle Hills sits inside Loop 410 with tree-lined streets and historic homes. Lots are smaller than the outer suburbs but owners invest heavily in their vehicles. We service driveways throughout Castle Hills and coordinate aircraft details at SAT and Stinson hangars five to fifteen minutes away.
Owner profile. Castle Hills is a tiny wealthy enclave inside San Antonio's loop. Lots are modest in size but owners trend high-end: sport boats trailered to Canyon Lake, owner-flown Cirrus and Citation aircraft at SAT, and luxury smaller-format RVs.
A center console in South Texas is a dual-life boat. Friday it's chasing redfish in Port Aransas. Saturday it's pulling kids on a tube at Canyon Lake. The hull sees Gulf saltwater, hard freshwater minerals, fish blood on the deck, baitfish bilge water, and ten hours of direct sun — every weekend. Stainless rod holders pit. Yamaha and Mercury outboard cowlings oxidize. T-tops crack at the corners where the vinyl headliner glues to aluminum. Live wells smell. We service every one of those touchpoints because a $90k center console deserves the same level of care as a Class A motorhome, and most local shops don't carry the right products to handle salt residue properly.
Where Castle Hills owners keep their center consoles.
Canyon Lake
40 minutes north from Castle Hills. Marinas: Cypress Bend Marina, Mountain Springs Resort, Cranes Mill Marina. Ramps: Cranes Mill Park ramp, Comal Park ramp, Boat Ramp #1 (Canyon City).
Hard mineral water from Comal Springs feed leaves spots if rinses aren't quick.
Stinson Municipal (SSF)
in town from Castle Hills. GA ramp loaded with owner-flown singles, twins, and turboprops. Multiple FBOs and tenant hangars.
Storage facilities
various I-10 corridor storage facilities, Loop 1604 storage yards, South Side storage parks. We service trailers and RVs on-site at storage yards.
Also serving these lakes
Medina Lake (40 minutes west), Lake LBJ (1 hour north), Lake Travis (1.5 hours northeast).
Additional airports
San Antonio International (SAT, in town) · Boerne Stage Field (5C1, in Boerne) · New Braunfels Regional (BAZ, 30 minutes east)
Center consoles protocol — Castle Hills edition.
Salt-residue wash on saltwater boats — Salt-X or equivalent chloride dissolver applied to every metal fitting, hose-flush after a 5-minute dwell.
Pressure rinse the hull, deck, T-top, and console, then apply marine-safe pre-soak to break down fish blood, baitfish slime, and DEET residue.
Hand-wash hull and topsides with non-stripping marine soap, soft microfiber mitt. Two-bucket method.
Polish gelcoat with a DA polisher and finish-appropriate pads; metalflake hulls get metalflake-safe polish.
Stainless rod holders, cleats, T-top hardware, and gunwale rails individually polished with stainless polish — pitting we can't remove gets flagged.
T-top vinyl headliner inspection — clean, check for cracks, re-glue minor lifts at no charge. Severe headliner failure recommended to a vinyl shop.
Outboard cowling polish — Yamaha, Mercury, Suzuki, Honda each have different paint chemistry. We use the right polish per brand.
Live well + fish box deodorization with marine enzyme; bilge wash to flush blood, slime, and standing water.
Electronics screens (Garmin GPSMAP, Simrad NSS, Lowrance HDS, Furuno, Raymarine) cleaned with screen-safe microfiber only — never glass cleaner.
Trailer wash, tire dressing, and trailer-coupler grease check. Marine sealant or salt-friendly ceramic on the hull.
What's included.
What owners always ask.
Yes — Canyon Lake (40 minutes north from Castle Hills) is one of our core service areas for center consoles. We work slip-kept boats at Cypress Bend Marina and Mountain Springs Resort and ramp-side jobs at Cranes Mill Park ramp. We bring our own water and power.
Yes — that's most of our center console customers. We carry chloride-dissolver products (Salt-X, Salt-Away) that pull salt out of metal fittings, plus standard freshwater hard-water removers. We can also set up a between-trip salt-flush schedule for boats that do Port A trips often.
Light pitting we can polish out. Deep pitting from years of salt exposure we can buff and refresh but it won't fully disappear. We tell you upfront what's recoverable before we start.
Yes. Yamaha cowling paint responds well to a polish-and-seal sequence. Mercury and Suzuki need slightly different products. We carry all three. Heavy oxidation may need light compounding, but most cowlings come back to deep gloss with a polish pass.
Only with OEM-approved cleaner and screen-safe microfiber. Never with glass cleaner — that hazes the anti-reflective coating on multifunction displays. We follow Garmin and Simrad guidance specifically.
All three. We service slip-kept boats at Canyon Lake, Medina, Travis, and LBJ; ramp-side boats at boat ramps; and driveway boats anywhere across San Antonio, Boerne, Bulverde, and Hill Country. Saltwater coast service is by appointment.
A standard wash, polish, vinyl, electronics, and bilge service on a 22-25 ft bay boat starts at $400. A full offshore center console (28-32 ft) with stainless and outboard polish runs $600-900. Heavy salt-corrosion restoration or ceramic coating is additional.
Park it. We'll handle it.
Same care, every job. We come to your Castle Hills driveway, dock, hangar, or storage site.