Center consoles detailing in Bulverde.
Saltwater-tested, freshwater-friendly detailing for bay boats, center consoles, and offshore fishing rigs.
Bulverde owners with center consoles typically work out of Canyon Lake (15 minutes east). Slip-kept boats at Cypress Bend Marina, Mountain Springs Resort, Cranes Mill Marina. Trailer launches at Cranes Mill Park ramp and Comal Park ramp. Hard mineral water from Comal Springs feed leaves spots if rinses aren't quick.
Service specs · Bulverde
Built for Bulverde owners.
Bulverde is a fleet-heavy area. The driveways are big enough for a 40-foot Class A and the shops are big enough for a 5th wheel. Add the proximity to Canyon Lake (15 minutes) and the home-hangared fleet at Bulverde Airpark, and we're routinely in Bulverde three days a week.
Owner profile. Semi-rural Hill Country ranchettes, large driveways and shops, weekend boats trailered to Canyon Lake, Class A motorhomes and 5th wheels for full-time and snowbird use, and the tight-knit Bulverde Airpark fly-in community.
A center console in South Texas is a dual-life boat. Friday it's chasing redfish in Port Aransas. Saturday it's pulling kids on a tube at Canyon Lake. The hull sees Gulf saltwater, hard freshwater minerals, fish blood on the deck, baitfish bilge water, and ten hours of direct sun — every weekend. Stainless rod holders pit. Yamaha and Mercury outboard cowlings oxidize. T-tops crack at the corners where the vinyl headliner glues to aluminum. Live wells smell. We service every one of those touchpoints because a $90k center console deserves the same level of care as a Class A motorhome, and most local shops don't carry the right products to handle salt residue properly.
Where Bulverde owners keep their center consoles.
Canyon Lake
15 minutes east from Bulverde. Marinas: Cypress Bend Marina, Mountain Springs Resort, Cranes Mill Marina. Ramps: Cranes Mill Park ramp, Comal Park ramp, Boat Ramp #1 (Canyon City).
Hard mineral water from Comal Springs feed leaves spots if rinses aren't quick.
Bulverde Airpark (1T8)
in Bulverde from Bulverde. Private airpark community with home-hangared aircraft.
RV resorts we visit
Hill Country Retreat, Buckhorn Lake Resort, Spring Branch RV Park.
Storage facilities
Bulverde Road storage yards, 281 corridor RV storage. We service trailers and RVs on-site at storage yards.
Also serving these lakes
Medina Lake (40 minutes west), Lake LBJ (1 hour north).
Additional airports
Boerne Stage Field (5C1, in Boerne) · Stinson Municipal (SSF, in town) · New Braunfels Regional (BAZ, 30 minutes east)
Center consoles protocol — Bulverde edition.
Salt-residue wash on saltwater boats — Salt-X or equivalent chloride dissolver applied to every metal fitting, hose-flush after a 5-minute dwell.
Pressure rinse the hull, deck, T-top, and console, then apply marine-safe pre-soak to break down fish blood, baitfish slime, and DEET residue.
Hand-wash hull and topsides with non-stripping marine soap, soft microfiber mitt. Two-bucket method.
Polish gelcoat with a DA polisher and finish-appropriate pads; metalflake hulls get metalflake-safe polish.
Stainless rod holders, cleats, T-top hardware, and gunwale rails individually polished with stainless polish — pitting we can't remove gets flagged.
T-top vinyl headliner inspection — clean, check for cracks, re-glue minor lifts at no charge. Severe headliner failure recommended to a vinyl shop.
Outboard cowling polish — Yamaha, Mercury, Suzuki, Honda each have different paint chemistry. We use the right polish per brand.
Live well + fish box deodorization with marine enzyme; bilge wash to flush blood, slime, and standing water.
Electronics screens (Garmin GPSMAP, Simrad NSS, Lowrance HDS, Furuno, Raymarine) cleaned with screen-safe microfiber only — never glass cleaner.
Trailer wash, tire dressing, and trailer-coupler grease check. Marine sealant or salt-friendly ceramic on the hull.
What's included.
What owners always ask.
Yes — Canyon Lake (15 minutes east from Bulverde) is one of our core service areas for center consoles. We work slip-kept boats at Cypress Bend Marina and Mountain Springs Resort and ramp-side jobs at Cranes Mill Park ramp. We bring our own water and power.
Yes — that's most of our center console customers. We carry chloride-dissolver products (Salt-X, Salt-Away) that pull salt out of metal fittings, plus standard freshwater hard-water removers. We can also set up a between-trip salt-flush schedule for boats that do Port A trips often.
Light pitting we can polish out. Deep pitting from years of salt exposure we can buff and refresh but it won't fully disappear. We tell you upfront what's recoverable before we start.
Yes. Yamaha cowling paint responds well to a polish-and-seal sequence. Mercury and Suzuki need slightly different products. We carry all three. Heavy oxidation may need light compounding, but most cowlings come back to deep gloss with a polish pass.
Only with OEM-approved cleaner and screen-safe microfiber. Never with glass cleaner — that hazes the anti-reflective coating on multifunction displays. We follow Garmin and Simrad guidance specifically.
All three. We service slip-kept boats at Canyon Lake, Medina, Travis, and LBJ; ramp-side boats at boat ramps; and driveway boats anywhere across San Antonio, Boerne, Bulverde, and Hill Country. Saltwater coast service is by appointment.
A standard wash, polish, vinyl, electronics, and bilge service on a 22-25 ft bay boat starts at $400. A full offshore center console (28-32 ft) with stainless and outboard polish runs $600-900. Heavy salt-corrosion restoration or ceramic coating is additional.
Park it. We'll handle it.
Same care, every job. We come to your Bulverde driveway, dock, hangar, or storage site.